Metal Roofs (AKA Low Sloped Roofs)

~Must first be washed with a special cleaner to remove all dirt & contaminations.
~Then primed with a metal roof primer & rust inhibitor.
~After that, we apply a polyurethane flashing to every seam.
~Then every screw head will be covered with a caulk grade polyurethane flashing.
~We finally apply 2 coats of elastomeric rubber coating which has a 86% reflectivity and
91% emissivity.
~A Polyurethane Foam System can be applied prior to elastomeric rubber coating (Optional for
insulation & additional water proofing).
~EPDM, Modified, PVC or TPO restoration systems can be applied.
~Elastometric Coatings are a common low cost restoration option.

~Contact us to set up a Free onsite consultation with one of our experts to go over each system
in detail.